Suche starten
Webmail-Login

Here you get access for your webmail!

Username:

Password:

Guitar-Bridge STM

« Back
Guitar-Bridge STM

High-quality bridge for all Les Paul™* type guitars with adjustable height, intonation and string spacing (roller bridge saddles). Complete with height adjustment screws and teenuts. (*Les Paul is a protected trademark owned by Gibson Musical Instruments Corporation)

Our STM bridge has two different types of saddle to suit the different string gauges: 3 U-shaped saddles for the high strings and 3 V-shaped saddles for the low strings.

Complete with height adjustment screws and teenuts.

Images

Technical drawing

To view the complete technical drawing, please use the download file.

Note: Acrobat Reader is required to view PDF files correctly!

Downloads

Technical drawing

Note: Acrobat Reader is required to view PDF files correctly!

Here you will find some additional, useful information about our Schaller product catalog.

Surface finishing

This Schaller Bridge "Hannes" is an example of the subtle differences between various surface finishes.

Schaller Bridge HannesSchaller Bridge HannesSchaller Bridge Hannes
NI-NickelCH-ChromeSC-SatinChrome
Schaller Bridge HannesSchaller Bridge HannesSchaller Bridge Hannes
BC-BlackChromeGO-GoldRU-Ruthenium
Schaller Bridge HannesSchaller Bridge Hannes

 SP-SatinPearl

 VC-VintageCopper

 

Ruthenium

In addition to information about ruthenium you will also find further coating options consisting of a gold/ruthenium combination. You will find more information about the metal Ruthenium under News, Press and Service/Lexicon.

Stop Saitenhalter RutheniumGoldRutheniumGold

  

Measure specifications

All measurements in the product catalogue are given in mm (inch), unless a different unit of measurement is stated.

 

Technical drawings and operating instructions

We do not accept any liability for the correctness of the technical drawings. Prior to installation, please measure for yourself once more, so you can consider regular manufacturing tolerances.

Please note that the technical data can also vary slightly, depending on the surface color. This is due to the difference in the galvanic coating and the galvanic layering, which depends on the color (nickel, chrome etc).

The technical drawings can be printed on one page width. Should the technical drawings not fit on one page, however, please check your print page setup (note: they can be several pages long).

From time to time, the measurements given in the file downloads on our website may differ from those given in the catalogue. Please bear in mind that the measurements given in the online downloads are current. Any discrepancies will be corrected when the catalogue is updated.

Technical Drawings Schaller Bridge Hannes

 

String retainers

You can use string retainers from your general guitar parts supplier as an alternative to our string ferrules.

String Retainers

 

 

Dimensions and adjustment options

Here, you can find an overview of the three-dimensional adjustment options for our Schaller bridges.
Specifics in mm:

HeightSingle-
slide		StringIntonation
minmaxSlide-
way		Slide-
way		minmaxSlide-
way		Slide-
way
Hannes Bridge10,313,83,53,3
STMheight-adjustable-screw4,048,557,59,07,0
Tailpiece






Fine Tuning Tailpiece






Stop Tailpiece






GTMheight-adjustable-screw7,5

Bridge-Tailpiece-
Combination 455

height-adjustable-screw7,5
Bridge-Tailpiece-
Combination 456
height-adjustable-screw7,5
3D-6
9,6 13,8 4,23,050,056,56,516,0
3D-6 String anchoring
from underneath






3D-49,715,15,44,753,462,89,418,0
3D-59,715,45,72,565,070,05,019,7
3D-8








Bass Bridge 2000 4-strings9,816,26,445,565,019,512,0
Bass Bridge 2000 5-strings9,816,26,460,581,020,512,0
Bass Bridge 2000 6-strings9,816,26,476,597,521,012,0
3D-6 Piezo10,714,74,012,3
GTM Piezoheight-adjustable-screw7,0
Bridge-Tailpiece-
Combination 455 Piezo






Bridge-Tailpiece-
Combination 456 Piezo






3D-4 Piezo9,014,05,0



16,0

Here in inch:

HeightSingle-
slide		StringIntonation
minmaxSlide-
way		Slide-
way		minmaxSlide-
way		Slide-
way
Hannes Bridge0,40550,54330,13780,1299
STMheight-adjustable-screw0,15751,90942,26380,3543
Tailpiece
Fine Tuning Tailpiece
Stop Tailpiece
GTMheight-adjustable-screw0,2756

Bridge-Tailpiece-
Combination 455

height-adjustable-screw0,2953
Bridge-Tailpiece-
Combination 456		height-adjustable-screw0,2953
3D-60,3780,54330,16540,11811,96852,22440,25590,6299
3D-6 String anchoring
from underneath
3D-40,382

0,594

0,21260,18502,10242,47240,37010,7087
3D-50,3820,6060,22440,09842,55912,75590,19690,7756
3D-8
Bass Bridge 2000 4-strings0,3860,6380,25201,79132,55910,76770,4724
Bass Bridge 2000 5-strings0,3860,6380,25202,38193,18900,80710,4724
Bass Bridge 2000 6-strings0,3860,6380,25203,01183,83860,82680,4724
3D-6 Piezo0,4210,5790,15750,4843
GTM Piezoheight-adjustable-screw0,2756
Bridge-Tailpiece-
Combination 455 Piezo
Bridge-Tailpiece-
Combination 456 Piezo
3D-4 Piezo0,3540,5510,19690,6299

  

Bolt- and Screwdistance

Specifics of distance and size in mm (inch):

The functional dimensions of our bridges in mm (inch) are given in the table below:

BridgeBolt-/ScrewdistanceSleeve gaugeBolt gauge
Hannes Bridge43,5 (1,7126)

 -

 -

STM74,0 (2,9134)

 7,2 (0,283)

4,9 (0,193)

Tailpiece82,0 (3,2283)

 11,2 (0,441)

7,9 (0,311)

Fine Tuning Tailpiece
82,0 (3,2283)

 11,2 (0,441)

7,9 (0,311)

Stop Tailpiece82,0 (3,2283)11,2 (0,441)7,9 (0,311)
GTM74,0 (2,9134) 7,2 (0,283)4,9 (0,193)
Bridge-Tailpiece-
Combination 455
82,0 (3,2283)

  11,2 (0,441)

7,9 (0,311)

Bridge-Tailpiece-
Combination 456		82,0 (3,2283)

 11,2 (0,441)

7,9 (0,311)

3D-620,5/20,5 (0,8071)-
-
3D-6 String anchoring
from underneath



3D-425,5/25,5 (1,0039)

-

 -

3D-533,0/33,0 (1,2992)

-

-

3D-8



Bass Bridge 2000 4-strings17,5/17,5/17,5/17,5 (0,6890)

-

-

Bass Bridge 2000 5-strings17,5/17,5/17,5/17,5 (0,6890)

-

-

Bass Bridge 2000 6-strings17,5/17,5/17,5/17,5/17,5 (0,6890)

-

-

3D-6 Piezo25,5/25,5 (1,0039)

-

-

GTM Piezo74,0 (2,9134)

 7,2 (0,283)

 4,9 (0,193)

Bridge-Tailpiece-
Combination 455 Piezo
Bridge-Tailpiece-
Combination 456 Piezo
 3D-4 Piezo25,5/25,5 (1,0039)--

  

Allen Key

We use six different Allen wrenches to adjust the various screws on our bridges. The sizes for these are 1.27mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm and 3.5mm. The following table shows which Allen wrenches should be used for each type of bridge (all measurements are stated in mm):

Article

Allen keys (mm)

mm

mm

inch

inch

inch 

Hannes Bridge

2,0

2,5

3,0

0,0787

0,0984

0,1181 

3D-4

1,5

 

 

0,0591

 

 

3D-5

1,5

 

 

0,0591

 

 

3D-6

1,27

 

 

0,0500

 

 

Bass Steg 2000

1,5

3,0

 

0,0591

0,1181

 

 

BridgesHeight adjustmentString adjustmentIntonation adjustment
Hannes bridge2,0

2,5

-

STM-

-

-

Tailpiece-

-

-

Fine Tuning Tailpiece-

-

-

Stop Tailpiece-
-
-
GTM-
-
-
Bridge-Tailpiece-
Combination 455		-

-

-

Bridge-Tailpiece-
Combination 456		-

-

-

3D-61,27
-
-
3D-6 String anchoring
from underneath
3D-41,5

-

-

3D-51,5

-

-

3D-8
Bass Bridge 2000 4-strings1,5

1,5

3,0

Bass Bridge 2000 5-strings1,5

1,5

3,0

Bass Bridge 2000 6-strings1,5

1,5

 3,0

3D-6 Piezo1,27

-

-

GTM Piezo-

-

-

Bridge-Tailpiece-
Combination 455 Piezo
Bridge-Tailpiece-
Combination 456 Piezo
 3D-4 Piezo1,5-
-

Which Schaller bridges can left-handed players use?

BridgesLefthanded?
Hannes bridgeNo
STMNo
TailpieceYes
Fine Tuning TailpieceYes
Stop TailpieceYes
GTMYes
Bridge-Tailpiece-
Combination 455		Yes
Bridge-Tailpiece-
Combination 456		Yes
3D-6Yes
3D-6 String anchoring
from underneath
3D-4Yes
3D-5Yes
3D-8

Bass Bridge 2000 4-stringsYes
Bass Bridge 2000 5-stringsYes
Bass Bridge 2000 6-stringsYes
3D-6 PiezoYes
GTM PiezoYes
Bridge-Tailpiece-
Combination 455 Piezo

Bridge-Tailpiece-
Combination 456 Piezo

3D-4 PiezoYes

 

FAQ

FAQ20010 I am a left-handed person, what do I need to consider with regard to Schaller bridges? Are they all suitable for left-handers without restrictions?

All Schaller bridges are suitable for left-handed guitars, with the exception of the "Hannes" and "STM". This is due to the diagonal arrangement of parts/saddles, which unfortunately cannot be altered.

FAQ20020 What do I need to do if I install a new bridge on my guitar and the existing drill holes are too large for the bushings included with the bridge?
We recommend filling in the drill holes and then re-drilling them - this also prevents unwanted resonance and movement. Any guitar maker should be able to do this for you.
FAQ20030 I would like to exchange my old bridge for a new one from Schaller. Unfortunately there will be unsightly holes from the old bridge. What can I do?
We include e.g. two blind screws with an LP tremolo, which cover the existing bore holes neatly and professionally. With other bridges and the same dimensions, changing or replacing is no problem at all.
FAQ20040 Do you also make bridges for 12-string guitars??
Sorry, we don't.
FAQ20050 Do you also make bridges with brass saddles?

No, we don't - or rather, only in part. These have not proven their worth in our experience. The roller saddles on our 3D-4, 3D-5 and 3D-6 bridges are made of brass.

FAQ20060 How does the Schaller fine-tuner (the tailpiece with the additional screws) work?

When stringing the guitar, please tune it as usual using the machine heads. Loosen the screws on the fine-tuner to the half-way point (or to the 3/4 point). When the guitar has been tuned using the machine heads, they can be more finely adusted as follows: Tightening the screw raises the pitch; loosening it lowers the pitch.

When making the initial adjustment, please allow the screws to protrude a little more than necessary (but not far enough to allow them fall out). This means they can be tightened accordingly during playing.

If this tightening results in the screws being tightened to the limit, please loosen them again and re-tune the string using the machine heads as usual. Then fine-tune again by tightening the screws once this has been done.

FAQ20070 I've heard that the Schaller bridges (e.g. GTM or STM), as with other manufacturers, only have one size of drive-in sleeves. What can I do?
Unfortunately, we cannot provide an appropriate sleeve for every imaginable size, and have thus decided to use only one size, i.e. the size that is used most frequently in the guitar industry. In these special cases, you should therefore contact a guitar maker who can work either with changes to the guitar body or with spacer sleeves.
FAQ20080 The Schaller 3D6 bridge has a screw on the treble side - what is this for?
You can use this screw to fix the string saddles in place so that they don't knock together and rattle when aggressive playing techniques are used.
FAQ20090 Can I fit Schaller's new "Hannes" bridge to any guitar?

Our Schaller "Hannes" bridge can be fitted to any guitar, provided that the body is flat at the point where the bridge is to be placed. Please find under Products/Product help/Hannes-Bridge. All information concerning Hannes-Bridge available.

FAQ20100 How is switching done on the pickups on the Schaller Piezo bridges?
There are no specific instructions for these Schaller bridges because the connection is in fact very simple.

You need to bring each of the 6 wires together in just one cable soldered with a jack socket or plug. (6x hosts and 6x cores together):

These cables can be fed directly into an amplifier or via an internal preamp.
There is also the option of feeding and switching the wires individually. This does make the whole thing more complicated, however, and is not necessary for "normal" use.
FAQ20110 Are the sounds individually picked up per saddle with the Schaller piezo bridges?
Yes, but normally they are combined to one line in a type-related way. If required, discuss other possibilities with a guitar maker or electrician.
FAQ20120 I would like to change the bridge on my guitar to a Schaller bridge, but I would like to re-use the existing screw sleeves if possible. How do I know whether or not the height adjustment screws of the Schaller bridge will fit the original sleeves?

You can find the appropriate data regarding screw/bolt diameters, listed in mm (metric measurement) in the "Guidelines" section.